Rolling Cart

I needed a way to move the old heap around once both the rear axle and front suspension was removed. I think I got the ideas somewhere and decided to build a couple ”H” frames to attach to both side of the uni-body.

I built the two frames using 1/8” thick 2”x2” tube, a few flat plates, some wheels and casters from Harbor Freights and a can of bright yellow.

I had already cut out the shock towers for the Mustang II front end and had welded the upper cross member and the coil-over support hardware. This hardware had provisions to accept a couple bolts so this is here I attached my frame. I added another piece forward to the bumper mounting threads to provide more stability.

The read frame was attached directly to the rear bumper threads.

I didn’t know what to expect when I tried to push the body back up the driveway and at first, I didn’t think I would be able to push it back up myself, but once the wheels started moving, it rolled rather easily.

Especially if you have help from your crew…